With a food metal detector, what is the best way to place the food products if they are wet or conductive?

For wet and conductive food products, center the package vertically in the head, ensuring the same amount of distance is above and below the package. Often this means that the head height will be larger than the standard sizing recommendation. This helps reduce the product signal by moving the product away from the electromagnetic coils.

使用食品金屬探測器時，如果食品是濕的或導電的，放置食品的最佳方式是什么？

答案:

對于潮濕且導電的食品，請將包裝垂直居中放置在頭部，確保包裝上方和下方的距離相同。通常這意味著頭部高度將大于標準尺寸的建議。這有助于通過使產品遠離電磁線圈來減少產品信號。

Are there environmental factors that can interfere with finding metal contaminants using a food metal detector?

Small metal foreign objects have very small signals, and the food metal detector is operating in a factory that has many possible noise sources that can confuse the metal detector electronics and software. Make sure you address some of these sources that can interfere with your testing:

- Large motors turning on and off

- Electronics boxes broadcasting wide spectrums of radiated noise

- Production equipment vibrating and causing the antenna in the metal detector to move ever so slightly

- Electrical power surging and dropping

- Temperatures going from freezing to boiling and back again

是否有環境因素會干擾使用食品金屬檢測儀發現金屬污染物？

答案:

小的金屬異物有非常小的信號，食品金屬探測器是在工廠中操作，有許多可能的噪聲源，可以混淆金屬探測器的電子和軟件。確保您解決了可能會干擾您的測試的一些來源:

-大型電動機的開啟和關閉

-廣播寬頻譜輻射噪音的電子箱

-生產設備振動，導致金屬探測器天線輕微移動

-電力波動和下降

-溫度從冰點到沸點，然后又回到冰點

What is the ideal size for the food metal detector head?

The size of the food metal detector head is based on the dimensions of the food package. Always simulate production conditions as closely as possible, including speed, temperature, and orientation of the product.

食品金屬探測頭的理想尺寸是多少？

答案:

食品金屬探測頭的尺寸是根據食品包裝的尺寸來確定的。始終盡可能模擬生產條件，包括產品的速度、溫度和方向。

What is the best way to ensure that the food metal detector "auto learns" accurately?

For all food grade metal detectors, eliminate as much background noise as possible. Then start with the manufacturer's default settings. Ensure that production samples are used for setup.

確保食品金屬探測器“自動學習”準確的最好方法是什么？

答案:

對于所有的食品級金屬探測器，盡可能消除背景噪音。然后從制造商的默認設置開始。確保生產樣品用于設置。

With a food metal detector, what should I do if metal is missed?

When metal is missed on the leading or trailing edges of a standard food grade metal detector, adjust sensitivity per the manufacturer's recommendation and when required, increase metal size until it is detected.

有了食品金屬檢測機，如果漏檢金屬，我該怎么辦？

答案:

如果標準食品級金屬檢測機的前緣或后緣未檢測到金屬，請根據制造商的建議調整靈敏度，必要時增加金屬尺寸，直至檢測到金屬。